Gauss measurement is the process of measuring magnetic systems and magnets with a digital gaussmeter. Gauss measurement, which should be done at regular intervals, is necessary for the safety of products. Our company, which provides professional gauss measurement services for food safety, is located in Pendik, Istanbul. In industrial food safety, our company produces professional solutions and serves all over Turkey. We visit your magnets on site and calculate how much power they have lost over the years. Magnetic field measurement service is a service that should not be simplified and should be taken regularly. For this reason, you can contact us to get corporate magnetic calibration service. In our measurements prepared and presented to you with a report, it is evaluated whether your magnets have sufficient power.

What Does Gaussmeter Measure?

Digital or analog gaussmeter measures the magnetic field intensity on the magnet surface. Digital Gaussmeters can usually measure a magnetic field of 16,000 Gauss and above. It measures the intensity of the magnetic field at a point or around an object. Analog gaussmeters, also known as magnetometers, can measure the small amount of magnetic field remaining on metal parts.

What is Magnet Gauss Value?

The Gauss expression indicates the amount of power of the magnet in the most basic sense. The higher this value, the more magnetic field the magnet is said to have. For example, it is very difficult to separate a 16,000 Gauss magnet from metals. While the amount of gauss in a standard N35 neodymium magnet is in the range of 3000-4000 Gauss, this is in the range of 2000-3000 gauss in ferrite magnets.

What is the Gauss Unit?

The Gauss symbol is known as G and refers to the intensity of the magnetic field. 10,000 Gauss is equal to 1 Tesla (T). So we can say that the Gauss unit is T (Tesla). Magnetic field intensity is expressed in Tesla in the SI unit, the international system of units, and in Gauss in the CGS unit. It reports how much magnetic flux is on the surface of a metal or magnet.

How to Measure Gauss in Magnetic Systems?

The magnetic field should be checked periodically in the products used in the separation of metals from the products, which we call magnetic separators. This process, which should be done once a year, is sought in the inspections of food companies. Therefore, as Magneteksan Makine, we produce magnetic separators and provide on-site measurement services to companies.

MG-607 Gaussmeter for Gauss Measurement

After the on-site magnetic field measurement, if the magnet types you need are, for example, a screen magnet or a magnetic filter, they are requested to be replaced with new ones.

Certified Gaussian Measurement Approved by Tübitak

The magnets owned by the enterprises producing food, pharmaceutical and hygienic products are measured and magnetic calibrated according to BRC, HACCP and other standards. You can contact us for professional magnet measurement service with our Tübitak approved Gaussmeter devices. Our devices are periodically calibrated and errors in the measurement report are minimized in this way.

As a competent company in the field of Gauss measurement and magnetic calibration, we serve all over Turkey. Here are some examples of our company’s work;

What Do We Pay Attention to in Gauss Measurement?

The magnet equipment used in the production line is checked under the following main headings under the magnet calibration service.

• The min. gauss amount that the magnetic equipment, “finger magnet, grid magnet, magnet filter, magnet plate” should have is checked.
• The pole spacing of the magnet is checked.
• General properties of the magnet, such as corrosion, impact, bacteria formation. properties are checked.
• The temperature to which the magnet is exposed is controlled.
• Magnet and product interaction is checked.
• BRC Certified Gauss Measurement for Food Safety

Our company, which performs gauss measurement for food production, organizes your special certificate for your audits. Magnetic calibration process is necessary for food and food contact materials. Magneteksan companyarak Gıda üretimi yapan firmalara Mıknatıs uygunluğu hizmeti vermekteyiz. Bu sayede gıda üretimleriniz aksamadan en iyi hizmeti bizlerden alıyorsunuz.

Gauss measurement must be performed by competent persons and institutions. Considering all the issues taken into consideration in BRC audits, a certificate showing the gauss values of the magnets is issued for each line.

Can Every Gaussmeter Measure?

Gaussmeter probe feature is very important and should be maintained. There are two types of Gaussmeter probes, Axial (Longitudinal) and Transverse (Transverse). Gaussmeter device should be checked and calibrated at certain intervals. If we are going to make Gauss Measurement with Gaussmeter device, we renew our device annually. The gaussmeter device is checked before and after the measurement service in our own organization. Afterwards, the new device is calibrated at TÜBİTAK UME center, which is the only authorized institution for traceability. Our Gaussmeter devices are regularly checked every year in TÜBİTAK UME and TURKAK accredited laboratories.

As a result of the Gauss Measurement, a certificate is issued separately for each magnet used in the factories and delivered to the company. “CAUTION MAGNET” labels are delivered to the company in accordance with BRC audit. Labels are attached to the appropriate area, which is the most important criterion for Gauss measurement, in terms of magnet use and cleaning.

We are the Competent Company for Gaussian Control

We are constantly trying to improve ourselves in Food Production issues such as Hazard Analysis and Critical Control Points (HACCP), Hazard Analysis and Risk-Based Preventive Controls (HARPC), Food Safety Modernization Act (FSMA), Critical Control Points (CCPs), Pre-requisite Program (PRP), Operational Pre-requisite Program (OP PRP) and Critical Control Points (CCP), production HACCP system.

Our Magneteksan company controls the magnets in accordance with the Gauss control BRC Global Standards (BRC audit) rules, reports according to the magnet calibration procedure and informs our valued customers of the standards that should be.