- Magneteksan
- > مگنتهای کشوی ورودی گرد
- > آهنربای کشویی ورودی و خروجی Ø100 میلیمتری – آهنربای توری دو ردیفه – میدان مغناطیسی 10000 گاوس
آهنربای کشویی ورودی و خروجی Ø100 میلیمتری – آهنربای توری دو ردیفه – میدان مغناطیسی 10000 گاوس
ویژگیهای عمومی؛ :استفاده عملی با کشوها
:طراحی ویژه دو ردیفه
- امکان تمیز کردن آسان
- دارای آهنربای نئودیمیم بسیار قوی
- مناسب برای مواد غذایی، دارای گواهینامههای BRC و HACCP
- استیل ضد زنگ و مهر و موم شده
مشخصات فنی؛
- قطر ورودی و خروجی: Ø100 میلیمتر
- قطر میله: 32 میلیمتر، تعداد میله: 1+2 دو ردیفه
- حداکثر دما: نئودیمیم 80 درجه سانتیگراد
- کلاس آهنربا (گرید): N35
- شار مغناطیسی BR: 14000 گاوس
- شار مغناطیسی در سطح: 10000 گاوس
جداکننده مغناطیسی با آهنربای توری دو ردیفه نئودیمیم – نوع توری
توری مغناطیسی، که یک طراحی ویژه است، دارای کشو بوده و عملکرد آسانی دارد. این سیستم که ما از آهنرباهای نئودیمیم N35 تولید میکنیم، دارای میدان مغناطیسی بسیار بالای 10000 گاوس است. کوچکترین ذرات فلزی را حتی بدون عبور از گرد و غبار خود به دام میاندازد. در این محصول، ورودی و خروجی به ابعاد دلخواه ساخته میشوند. این محصول با یا بدون فلنج تولید میشود.
این محصولات میتوانند در میدانهای مغناطیسی بسیار قوی که شرکتهای مواد غذایی به آن نیاز دارند، استفاده شوند. جداکننده مغناطیسی کشویی از جنس استیل ضد زنگ بوده و برای تماس با مواد غذایی مناسب است. بخش آهنربای توری با قطرهای میله Ø32 میلیمتر دو ردیفه بوده و دارای ساختار ضربی است. بدین ترتیب، با پخش شدن محصولات، حداکثر فرصت جذب فراهم میشود. برای پروژههای خاص خود میتوانید با ما تماس بگیرید.
به لطف کاهش در محفظه توری مغناطیسی، جریان محصول را مسدود نمیکند.
مقاومت به خوردگی بسیار بالا است، با فولاد ضد زنگ AISI 304 و AISI 316 که مورد ترجیح شرکتهای مواد غذایی هستند، پوشش داده شده است. آهنربای توری نئودیمیم را میتوان با گاوس بالای مورد نظر تولید کرد.
این محصول تولیدی خاص بوده و پس از ارسال نقشه فنی به شرکت شما، وارد مرحله تولید میشود. بنا به درخواست شما، اشکال اتصال را میتوان در مرحله طراحی تعیین کرد. این محصول را میتوان به راحتی در مناطق ریختهگری نصب کرد. میتوان از آن در محیطهای فعال با مایعات به صورت کاملاً آببندی شده استفاده کرد.
اگر در محلی که استفاده میکنید دما وجود دارد، باید آهنرباها را برای دماهای مناسب انتخاب کنید. لطفاً دمای محیط را مشخص کنید.
چرا از پوششهای ضد زنگ 304 و 316 در محصولات خود استفاده میکنیم؟
فولادهای ضد زنگ در شرکتهای تولید مواد غذایی استفاده میشوند. فولادهای ضد زنگ آستنیتی حاوی کروم تا 10 درصد از ترکیب کلی هستند. کروم، که مستقیماً با اکسیژن تعامل دارد، به سرعت یک لایه محافظ غیرفعال روی سطح ایجاد میکند. این لایه از ایجاد لایه خورنده مضر که ممکن است روی سطح مواد ایجاد شود جلوگیری کرده و لایهای با مقاومت سطحی بالا ایجاد میکند.
Production of Magnetic Filters with Certified Magnets
magnetic filters are used in the final products of companies engaged in food manufacturing. magnetic filters are preferred at critical control points and to protect equipment. Magnets with a value of 10000 Gauss and 12500 Gauss and 13500 Gauss are among the most important equipment for ensuring the safety of food. Magnetic rods are made of complete stainless material. There is no formation of bacteria on their surface and it is suitable for food.
Magnetic filters are produced in accordance with world-wide standards such as BRC, HACCP and TSE.
Our magnetic filters are domestic production. We have production in special sizes and strengths for corporate companies. With special 304 and 316 stainless steel sheet infrastructure, special control system, these filters will never miss metal.
Technical Characteristics of the Magnetic Filters We Produce
Magnetic filters can be manufactured with the following technical specifications. The cases of bar magnets in acidic and basic environments can be produced from 316L and 304 quality stainless steel.
- Even metal powders are easily removed, while power is not compromised.
- The magnetic rods are detachable from the body. Thanks to this, the repair is easy.
- The body diameter to which the magnetic rods are connected is produced in the desired diameters such as 3”, 4”, 5” and 6”.
- It can be designed with and without a case according to customer requirements.
- Thanks to the neodium magnets used in the sheath, they have a very high flux strength.
- NdFeB Neodymium magnets with a FLUX strength of about 10000 – 14000 GAUSS are used outside the sheath.
- They can withstand standard temperatures of 80°C and a Maximum of 200°C.
- Bar Magnetic filters are made of cast or welded 304 stainless steel housing with a maximum resistance pressure of 10 Bar.
- Magnetic filters with rods NdFeB Neodymium magnets are manufactured in 304 stainless steel pipes.
- Rods stored in 304 stainless steel pipes again have 304 Stainless rod sleeves.
- It is produced with a 1” brass discharge valve at the bottom of the horizontal connection.
- The system can be produced in a self-cleaning manner and with manual cleaning according to customer demand.
Frequently Asked Questions
Frequently asked questions about our products and magnetic filters.
- Is a magnetic filter used for powder or dry products?
Answer: No. The magnetic filter is specially designed to separate iron particles from the liquid products. - How are the captured iron particles cleaned?
Answer: In manual cleaning filters, the block with magnetic bars is removed and cleaned by manually stripping with a suitable material. In filters with automatic cleaning, metals fall off easily by themselves when you remove the block part. - Can the filter housing be made of normal metal instead of stainless?
Answer: No. A magnet attracts metal, but it does not attract rust. In the case of metal, the magnetic field makes a short circuit with the metal body, which reduces its efficiency. That’s why we only produce stainless. - Is the housing of the magnetic filter also magnetic?
Answer: The housing is not magnetic. The rods built into the housing are magnetic, which traps iron particles. - Is electricity required to operate the magnetic filter?
Answer: The magnetic filter is made up of permanent magnets, so it does not require a power supply. - Can we use a magnetic filter for highly corrosive/acidic liquid?
Answer: Yes. We make special coatings for such applications. - How long is the life of the magnet?
Answer: The power of magnets is permanent. The magnet can be demagnetized in two cases, a) When it is damaged. b) When the magnet is exposed beyond the specified operating temperature. However, the magnet may lose its magnetic strength by 2% to 3% over the course of 5 years. - Can we charge the magnet? Can we increase its power?
Answer: No. The magnet cannot be charged. Only our flexible magnets are strengthened by quenching. - How can we measure the strength of the magnet?
Answer: The Gauss unit of magnetic power can be controlled by gauss meter. The magnetic filters you will receive are delivered with a Gauss report and are valid for 1 year. - Can we change the Magnetic Rod of the Magnetic Filter?
Answer: The Magnetic Rods cannot be removed in the case where they are welded with the upper cover of the filter. However, in some cases we produce by connecting with bolts. In this case, change is possible.

