Magnet cu sertar de intrare și ieșire Ø100 mm – Magnet cu grilă dublă – Câmp magnetic de 10000 Gauss

Separator magnetic cu magnet de grilă dublă din neodim – Tip grilă

Grila magnetică, care este un design special, are un sertar și o operare ușoară. Acest sistem, pe care îl producem din magneți de neodim N35, are un câmp magnetic foarte puternic de 10000 Gauss. Captează cele mai fine particule metalice fără a le lăsa să treacă, nici măcar praful lor. La produs, intrarea și ieșirea de tip fagure sunt realizate la dimensiunile dorite. Se produce cu sau fără flanșe.

Aceste produse pot fi utilizate în câmpuri magnetice foarte puternice de care vor avea nevoie companiile alimentare. Separatorul magnetic cu sertar este inoxidabil și potrivit pentru contactul cu alimentele. Partea magnetului cu sită, cu diametre ale barelor de Ø32 mm, este pe 2 rânduri și are o structură multiplicatoare. Astfel, se oferă oportunitatea maximă de captură prin răspândirea produselor. Ne puteți contacta pentru proiectele dumneavoastră speciale.

Datorită reducerii în carcasa grilei magnetice, aceasta nu blochează fluxul produsului.

Rezistența la coroziune este foarte mare, este acoperită cu oțel inoxidabil AISI 304 și AISI 316, care sunt preferate de companiile alimentare. Magnetul de grilă din neodim poate fi produs la valorile ridicate de Gauss dorite.

Produsul este o producție specială și este pus în fabricație după trimiterea desenului tehnic către compania dumneavoastră. Conform cererii dumneavoastră, formele de conectare pot fi determinate în etapa de proiectare. Produsul poate fi instalat cu ușurință în zonele de turnare. Poate fi utilizat în medii activate lichid într-un mod complet sigilat.

Dacă există o temperatură în zona în care îl veți utiliza, ar trebui să se aleagă magneți utilizați la temperaturi adecvate. Vă rugăm să specificați temperatura ambiantă.

De ce utilizăm acoperiri din oțel inoxidabil 304 și 316 în produsele noastre ?

Oțelurile inoxidabile sunt utilizate în companiile implicate în producția de alimente. Oțelurile inoxidabile austenitice conțin crom până la 10% din compoziția totală. Cromul, care interacționează direct cu oxigenul, formează rapid un strat protector pasiv la suprafață. Previne stratul coroziv dăunător care poate apărea la suprafața materialului și creează un strat cu rezistență ridicată la suprafață.

Production of Magnetic Filters with Certified Magnets

magnetic filters are used in the final products of companies engaged in food manufacturing. magnetic filters are preferred at critical control points and to protect equipment.  Magnets with a value of 10000 Gauss and 12500 Gauss and 13500 Gauss are among the most important equipment for ensuring the safety of food.  Magnetic rods are made of complete stainless material. There is no formation of bacteria on their surface and it is suitable for food.

Magnetic filters are produced in accordance with world-wide standards such as BRC, HACCP and TSE.

Our magnetic filters are domestic production. We have production in special sizes and strengths for corporate companies. With special 304 and 316 stainless steel sheet infrastructure, special control system, these filters will never miss metal.

Technical Characteristics of the Magnetic Filters We Produce

Magnetic filters can be manufactured with the following technical specifications. The cases of bar magnets in acidic and basic environments can be produced from 316L and 304 quality stainless steel.

• Even metal powders are easily removed, while power is not compromised.
• The magnetic rods are detachable from the body. Thanks to this, the repair is easy.
• The body diameter to which the magnetic rods are connected is produced in the desired diameters such as 3”, 4”, 5” and 6”.
• It can be designed with and without a case according to customer requirements.
• Thanks to the neodium magnets used in the sheath, they have a very high flux strength.
• NdFeB Neodymium magnets with a FLUX strength of about 10000 – 14000 GAUSS are used outside the sheath.
• They can withstand standard temperatures of 80°C and a Maximum of 200°C.
• Bar Magnetic filters are made of cast or welded 304 stainless steel housing with a maximum resistance pressure of 10 Bar.
• Magnetic filters with rods NdFeB Neodymium magnets are manufactured in 304 stainless steel pipes.
• Rods stored in 304 stainless steel pipes again have 304 Stainless rod sleeves.
• It is produced with a 1” brass discharge valve at the bottom of the horizontal connection.
• The system can be produced in a self-cleaning manner and with manual cleaning according to customer demand.

Frequently Asked Questions

Frequently asked questions about our products and magnetic filters.

1. Is a magnetic filter used for powder or dry products?
   Answer: No. The magnetic filter is specially designed to separate iron particles from the liquid products.
2. How are the captured iron particles cleaned?
   Answer: In manual cleaning filters, the block with magnetic bars is removed and cleaned by manually stripping with a suitable material. In filters with automatic cleaning, metals fall off easily by themselves when you remove the block part.
3. Can the filter housing be made of normal metal instead of stainless?
   Answer: No. A magnet attracts metal, but it does not attract rust. In the case of metal, the magnetic field makes a short circuit with the metal body, which reduces its efficiency. That’s why we only produce stainless.
4. Is the housing of the magnetic filter also magnetic?
   Answer: The housing is not magnetic. The rods built into the housing are magnetic, which traps iron particles.
5. Is electricity required to operate the magnetic filter?
   Answer: The magnetic filter is made up of permanent magnets, so it does not require a power supply.
6. Can we use a magnetic filter for highly corrosive/acidic liquid?
   Answer: Yes. We make special coatings for such applications.
7. How long is the life of the magnet?
   Answer: The power of magnets is permanent. The magnet can be demagnetized in two cases, a) When it is damaged. b) When the magnet is exposed beyond the specified operating temperature. However, the magnet may lose its magnetic strength by 2% to 3% over the course of 5 years.
8. Can we charge the magnet? Can we increase its power?
   Answer: No. The magnet cannot be charged. Only our flexible magnets are strengthened by quenching.
9. How can we measure the strength of the magnet?
   Answer: The Gauss unit of magnetic power can be controlled by gauss meter. The magnetic filters you will receive are delivered with a Gauss report and are valid for 1 year.
10. Can we change the Magnetic Rod of the Magnetic Filter?
    Answer: The Magnetic Rods cannot be removed in the case where they are welded with the upper cover of the filter. However, in some cases we produce by connecting with bolts. In this case, change is possible.