- Magneteksan
- > Magnetic Lifters
- > Magnetic Lever Spare Arm – PML600, PML1000, PML2000 Compatible
Magnetic Lever Spare Arm – PML600, PML1000, PML2000 Compatible
Magnetic Lever Spare Arm – PML600, PML1000, PML2000 Compatible
General characteristics;
- Steel magnetic sleeve
- High weight resistant
- Rubber handle
- Security lock
- Safety limits
- Mechanical switch
Technical specifications
- Length: PML600:245 mm, PML1000:275 mm, PML2000:335 mm
- Diameter: PML600 22 mm, PML1000: 23 mm, PML2000: 24 mm
Kategori: Magnetic Lifters
Product Information
Extra Information
Product Information
Magnetic Levers Spare Parts – Levers
The magnetic carrier magnet with arm allows you to carry tons of weight by minimizing the use of human power. These heavy levers used with the help of a crane may need maintenance after long use. When it is constantly switched on and off, the magnetic lever arm may be damaged or damaged.
The lever arm with magnetic arm is in a steel assembly and is resistant to external impacts. The rubber coating on it makes it easier to use and prevents it from slipping. It helps during installation and disassembly of the lever with security locks. When you want to activate or deactivate the magnetic part, these security locks prevent human mutilation. In addition, thanks to the safety limits, the handles of the magnetic levers do not open or close too much. Our spare parts that you can use for many years in this system, which is completely mechanical, are in stock.
You can request a quotation from the contact section for magnetic lever spare arms compatible with PML-600, PML1000 and PML2000.
You can also contact us for your need for magnetic lever spare parts of different brands and models.
How is magnetic leverage used?
The magnetic lever does not require any extra power. It is lifted with the help of a crane and does not require electricity. With the help of the arm on it, the magnetic power becomes active. If the lever is not pulled, the device does not offer any power and is in the off position.
- Before using the device, clean the metal surface thoroughly.
- Place the magnetic lever right in the middle of the metal part.
- To activate the device, first lower the magnetic lever onto the part you are going to lift.
- Pull the lever and activate the device.
- After holding your magnetic power piece, the crane and so on. with its help, lift and move the metal.
- When your part has reached the desired position, turn the lever off again.
Extra Information
