- Magneteksan
- > Okrugli ulazni magneti za ladice
- > Ø100 mm ulazna i izlazna ladica magnet – Rešetkasti magnet s dvostrukim redom – Magnetsko polje od 10000 Gaussa
Ø100 mm ulazna i izlazna ladica magnet – Rešetkasti magnet s dvostrukim redom – Magnetsko polje od 10000 Gaussa
Ø100 mm ulazna i izlazna ladica magnet – Rešetkasti magnet s dvostrukim redom – Magnetsko polje od 10000 Gaussa
Opće karakteristike; :Praktična upotreba s ladicama
:Poseban dizajn s dvostrukim redom
- Mogućnost jednostavnog čišćenja
- Neodim ima vrlo jak magnet
- Pogodno za hranu, BRC i HACCP certificirano
- Nehrđajući i zapečaćen
Tehničke specifikacije;
- Ulazni i izlazni promjer: Ø100 mm
- Promjer šipke: 32 mm, Broj šipki: 2+1 dvoredni
- Maksimalna temperatura: Neodim 80°
- Klasa magneta (stupanj): N35
- Magnetski tok BR: 14000 Gaussa
- Magnetski tok na površini: 10000 Gaussa
Magnetski separator s dvostrukim redom rešetkastih magneta Neodim – Rešetkasti
Tip
Magnetska rešetka, koja je posebnog dizajna, ima ladicu i jednostavna je za rukovanje. Ovaj sustav, koji proizvodimo od N35 neodimijskih magneta, ima vrlo visoko magnetsko polje od 10000 Gaussa. Hvata najfinije metalne čestice, čak i bez prolaska kroz njihovu prašinu. U proizvodu, ulaz i izlaz košnice izrađeni su u željenim dimenzijama. Proizvodi se s prirubnicama ili bez njih.
Ovi se proizvodi mogu koristiti u vrlo visokim magnetskim poljima koja će biti potrebna prehrambenim tvrtkama. Magnetski separator s ladicom je nehrđajući i pogodan za kontakt s hranom. Dio magneta zaslona s promjerima šipki Ø32 mm je dvoredan i ima umnožavajuću strukturu. Time se osigurava maksimalna mogućnost hvatanja širenjem proizvoda. Možete nas kontaktirati za vaše posebne projekte.
Zahvaljujući smanjenju kućišta magnetske rešetke, ne blokira protok proizvoda.
Otpornost na koroziju je vrlo visoka, obložena je nehrđajućim čelikom AISI 304 i AISI 316, koji su preferirani od strane prehrambenih tvrtki. Neodimijska rešetkasti magnet može se proizvesti s željenim visokim Gaussom.
Proizvod je posebne izrade i pušta se u proizvodnju nakon što se tehnički crtež pošalje vašoj tvrtki. Prema vašem zahtjevu, oblici spajanja mogu se odrediti u fazi projektiranja. Proizvod se lako može instalirati u zonama lijevanja. Može se koristiti u tekućinama aktiviranim okruženjima na potpuno zapečaćen način.
Ako postoji temperatura u području koje ćete koristiti, trebalo bi se preferirati za magnete koji se koriste na odgovarajućim temperaturama. Molimo navedite temperaturu okoline.
Zašto koristimo premaze od nehrđajućeg čelika 304 i 316 u našim proizvodima?
Nehrđajući čelici koriste se u tvrtkama koje se bave proizvodnjom hrane. Austenitni nehrđajući čelici sadrže krom do 10 posto ukupnog sastava. Krom, koji izravno stupa u interakciju s kisikom, brzo stvara pasivni zaštitni sloj na površini. Sprječava štetan korozivni sloj koji se može pojaviti na površini materijala i stvara sloj s visokom površinskom otpornošću.
Production of Magnetic Filters with Certified Magnets
magnetic filters are used in the final products of companies engaged in food manufacturing. magnetic filters are preferred at critical control points and to protect equipment. Magnets with a value of 10000 Gauss and 12500 Gauss and 13500 Gauss are among the most important equipment for ensuring the safety of food. Magnetic rods are made of complete stainless material. There is no formation of bacteria on their surface and it is suitable for food.
Magnetic filters are produced in accordance with world-wide standards such as BRC, HACCP and TSE.
Our magnetic filters are domestic production. We have production in special sizes and strengths for corporate companies. With special 304 and 316 stainless steel sheet infrastructure, special control system, these filters will never miss metal.
Technical Characteristics of the Magnetic Filters We Produce
Magnetic filters can be manufactured with the following technical specifications. The cases of bar magnets in acidic and basic environments can be produced from 316L and 304 quality stainless steel.
- Even metal powders are easily removed, while power is not compromised.
- The magnetic rods are detachable from the body. Thanks to this, the repair is easy.
- The body diameter to which the magnetic rods are connected is produced in the desired diameters such as 3”, 4”, 5” and 6”.
- It can be designed with and without a case according to customer requirements.
- Thanks to the neodium magnets used in the sheath, they have a very high flux strength.
- NdFeB Neodymium magnets with a FLUX strength of about 10000 – 14000 GAUSS are used outside the sheath.
- They can withstand standard temperatures of 80°C and a Maximum of 200°C.
- Bar Magnetic filters are made of cast or welded 304 stainless steel housing with a maximum resistance pressure of 10 Bar.
- Magnetic filters with rods NdFeB Neodymium magnets are manufactured in 304 stainless steel pipes.
- Rods stored in 304 stainless steel pipes again have 304 Stainless rod sleeves.
- It is produced with a 1” brass discharge valve at the bottom of the horizontal connection.
- The system can be produced in a self-cleaning manner and with manual cleaning according to customer demand.
Frequently Asked Questions
Frequently asked questions about our products and magnetic filters.
- Is a magnetic filter used for powder or dry products?
Answer: No. The magnetic filter is specially designed to separate iron particles from the liquid products. - How are the captured iron particles cleaned?
Answer: In manual cleaning filters, the block with magnetic bars is removed and cleaned by manually stripping with a suitable material. In filters with automatic cleaning, metals fall off easily by themselves when you remove the block part. - Can the filter housing be made of normal metal instead of stainless?
Answer: No. A magnet attracts metal, but it does not attract rust. In the case of metal, the magnetic field makes a short circuit with the metal body, which reduces its efficiency. That’s why we only produce stainless. - Is the housing of the magnetic filter also magnetic?
Answer: The housing is not magnetic. The rods built into the housing are magnetic, which traps iron particles. - Is electricity required to operate the magnetic filter?
Answer: The magnetic filter is made up of permanent magnets, so it does not require a power supply. - Can we use a magnetic filter for highly corrosive/acidic liquid?
Answer: Yes. We make special coatings for such applications. - How long is the life of the magnet?
Answer: The power of magnets is permanent. The magnet can be demagnetized in two cases, a) When it is damaged. b) When the magnet is exposed beyond the specified operating temperature. However, the magnet may lose its magnetic strength by 2% to 3% over the course of 5 years. - Can we charge the magnet? Can we increase its power?
Answer: No. The magnet cannot be charged. Only our flexible magnets are strengthened by quenching. - How can we measure the strength of the magnet?
Answer: The Gauss unit of magnetic power can be controlled by gauss meter. The magnetic filters you will receive are delivered with a Gauss report and are valid for 1 year. - Can we change the Magnetic Rod of the Magnetic Filter?
Answer: The Magnetic Rods cannot be removed in the case where they are welded with the upper cover of the filter. However, in some cases we produce by connecting with bolts. In this case, change is possible.
